Toshiba Portégé 650CT User Manual page 452

Turning the Power Off
This section describes how to turn the computer off correctly.
Using Resume Mode
This guide describes two ways you can turn the computer off and
return to the same place in your work when you turn it on again:
the Suspend Command and Resume Mode. The Suspend Com-
mand is a feature of Windows 95. With Windows for Workgroups
you must use Resume mode instead. You can turn Resume Mode
on in any of the ways described in this guide: MaxTime, a hotkey
or TSETUP.
Turning the Computer Off
When you're ready to turn the computer off, assuming Resume
Mode isn't turned on, follow these steps:
1 Save your files and close any programs you're using.
2 In Program Manager, press
3 Wait for MS-DOS to display the command prompt.
Always wait until you see the command prompt before you
turn the computer off. You may get unpredictable results the
next time you start Windows if you don't let it shut down
completely.
4 Turn the computer off.
Part III: Appendixes
Using Windows for Workgroups
Turning the Power Off
+ to exit Windows.
Alt F4
481