Toshiba Portégé 650CT User Manual page 400

Option Settings
Parallel LPT1 (378H/
IRQ7/CH3)
(default)
LPT2 (278H/
IRQ5/CH3)
LPT3 (3BCH/
IRQ7/CH3)
Not Used
If you set the Parallel Port to anything other than Not Used, a
drop-down list box appears offering a choice between ECP and
Std. Bi-directional. If you choose ECP, you may also set the
DMA channel. Set this option to Std. Bi-directional if the docu-
mentation for your parallel device instructs you to do so, or you
are having problems with your printer or other parallel device.
Sound Enabled
(default)
Not Used
The following sound system options are in a drop -down list
box that appears when you highlight Enabled for the Sound
option.
WSS I/O 534H (default)
Address
608H
E84H
F44H
Part II: Technical Reference
TSETUP
The Second Page
Usage
Sets the port name,
address, interrupt request
level and DMA channel
through which the com-
puter communicates with
the parallel port.
The DMA channel is only
displayed if you select
ECP (Enhanced Capabil-
ity Port).
Lets you turn the sound
system on or off.
Lets you set a unique I/O
address for the sound sys-
tem when you are using it
as Windows Sound Sys-
tem compatible.
421
Restart
Y
Y
Y