Allocate Numbers To Speed-Dial - Cisco DX70 User Manual

37 Contacts
Allocate Numbers to Speed Dial
Tap Calls to invoke this display. Then tap
More ( ... ) followed by Add a speed dial in
the drop-down menu.
Tap More ( ... ) again.
Specify the speed-dial code to associate with
this person. In this example, the speed-dial
code is 1. Tap OK to leave the menu and save
your changes.
You are prompted to log in to the system
with your username and password.
Tap Add a speed dial in the drop-down
menu.
The speed-dial allocation and the
corresponding code are shown as indicated.
Authentication then takes place.
Locate the person to allocate to a speed
dial.
About Speed Dial
Speed dial provides a convenient
shortcut to contacts that you use
often. You allocate a speed-dial
code (typically a number) to the
entry and use that code to call that
person.
The Calling Tasks chapter describes
how to use speed-dial settings that
are already allocated.
D1510406 English
User Guide Cisco DX70, Cisco DX80
Produced: November 2014, All Contents © 2014
Cisco Systems, Inc. All Rights Reserved.