Start Or Join A Meet Me Conference - Cisco DX70 User Manual

29 Meet Me Conference

Start or Join a Meet Me Conference

Start a Meet Me Conference
Tap Call.
Tap the green Call button.
Join a Meet Me Conference That Someone Else Started
Dial the Meet Me conference number
that the conference initiator provides.
The Call menu opens.
You have initiated a Meet Me conference.
If you hear a busy tone, the conference
initiator has not joined the conference.
Wait a minute, then try your call again.
Tap Meet Me.
About Meet Me
Conference
Meet Me conferencing enables
you to start or join a conference
by calling the conference number
instead of calling specific parties
one by one to create a conference.
•
If you call a secure Meet Me
conference number from a
non-secure phone, your phone
displays the message Device Not
Authorized.
•
A Meet Me conference ends when
all participants hang up.
•
If the conference initiator disconnects,
the conference call continues until all
participants hang up.
Note that participants cannot join the
conference until the initiator starts
the conference.
D1510406 English
User Guide Cisco DX70, Cisco DX80
Produced: November 2014, All Contents © 2014
Cisco Systems, Inc. All Rights Reserved.