Create Conference - Cisco DX70 User Manual

28 Ad Hoc Conference

Create Conference

In a call, tap Add.
When the new recipient answers, tap
Merge to generate the conference.
Call another person in the usual way.
Tap End to terminate the conference.
The person you were in a call with gets put
on hold, while the new recipient is called.
About Create Conference
To expand an ongoing call into a
conference, just add participants.
Add participants by dialing their
number, name, or address; by using
the list of Contacts; or by using any
mixture of these two methods.
If you tap the information icon
( ) that appears in the upper right
corner during the conference, you
will see the list of participants.
Participants are listed in the order in
which they join the conference with
the most recent additions at the top.
Tip: To remove a conference
participant, highlight the participant
and tap End Call.
You can remove participants only if
you initiated the conference call.
D1510406 English
User Guide Cisco DX70, Cisco DX80
Produced: November 2014, All Contents © 2014
Cisco Systems, Inc. All Rights Reserved.