Hold And Resume - Cisco DX70 User Manual

15 Common Call Tasks

Hold and Resume

In a call, tap Hold.
Your screen now looks as shown, and music plays
while the call remains on hold. To resume the call, tap
Resume.
About Hold and Resume
You can hold and resume calls. This
feature can be used to call someone
while a call is already active.
When you put a call on hold, the
Hold icon appears on the right in the
call information area. With a shared
line, when another phone places a
call on hold, the device displays the
Remote Hold icon.
If the Hold Reversion feature is
enabled for your device, a call that
you put on hold reverts to ringing
after a certain time. The reverted call
remains on hold until you resume
it or until Hold Reversion times out.
Your device indicates the presence
of a reverting call as follows:
•
Alerts you at intervals with a single
ring (or flash or beep, depending
on your phone line setting).
•
Briefly displays a Hold Reversion
message in the status bar at the
bottom of the phone screen.
•
Displays the animated Hold
Reversion icon next to the caller ID
for the held call.
D1510406 English
User Guide Cisco DX70, Cisco DX80
Produced: November 2014, All Contents © 2014
Cisco Systems, Inc. All Rights Reserved.