Send A Voicemail - Cisco DX70 User Manual

21 Visual Voicemail

Send a Voicemail

Tap Messages in the left column, then tap
+ in the upper right corner and select New
Message from the drop-down list.
You may record again, if needed.
Tap Record.
Enter the name, number, or address of the
receiver. When you finish, tap Send.
When your message is complete, tap Done.
The display returns to display a list of the
Messages.
About Visual Voicemail
The Visual Voicemail tool lets you
manage your voice messages.
D1510406 English
User Guide Cisco DX70, Cisco DX80
Produced: November 2014, All Contents © 2014
Cisco Systems, Inc. All Rights Reserved.