How Do I Turn On The Heating Or Cooling Cycles - Lennox SignatureStat 81M26 User Manual

110-1052F 5/12/05 11:59 AM

How do I turn on the heating or cooling cycles?

MONDAY 3:29 PM
78
HOLD TEMP
Use the UP or DOWN arrows to highlight HEAT, COOL
or AUTO CHANGEOVER. Press SELECT. The SELECT
button will turn on or off the desired cycle. You do not
have to turn off HEAT to turn on COOL. When HEAT or
COOL or AUTO CHANGEOVER is turned on, all others
are automatically shut off. After pressing the SELECT
button, the main screen will automatically appear.
NOTE: Emergency heat is used only on the 81M28 model.
It should only be used if the primary stage of heating
cannot maintain the temperature of the conditioned space.
(AUTO CHANGEOVER will appear in the menu only if it is
enabled in Installer Settings.)
Page 5
From the main screen press MENU.
COOL
FAN AUTO
SET AT
78
MENU
MENU
PROGRAM
HEAT / COOL
DAY / TIME
FAN
HOME
SELECT
Use the UP or DOWN arrows to highlight HEAT/COOL.
Press SELECT.
MORE
HEAT / COOL SETTINGS
HEAT
COOL
AUTO CHANGEOVER
EMERGENCY HEAT
MAIN MENU SELECT
HEAT / COOL SETTINGS
HEAT
COOL
AUTO CHANGEOVER
EMERGENCY HEAT
MAIN MENU
SELECT
5