Travelling
Check with local authorities prior to departure as rules and regulations
may change without notice . Follow these guidelines when travelling:
• Notify security personnel of the presence of the device when going
through security systems .
• If you need to disable your Transmitter:
1. Select Menu ➞ Settings ➞ Airplane Mode ➞ Wireless = Off
and hold the Receiver directly on top of your Transmitter .
When your Transmitter is disabled, you will see the
"In Airplane Mode" on the Home screen .
• To re-enable your Transmitter:
1. Select Menu ➞ Settings ➞ Airplane Mode ➞ Wireless = On
and hold the Receiver directly on top of your Transmitter .
You will see the
icon when the wireless communication of
your Transmitter is re-enabled .
Note: If you are changing time zones, you can manually change the
time and date settings on your Receiver by selecting Menu ➞ Settings
➞ Time & Date. Changing the time and date affects the Timeline
Graph and statistical results.
25
ART22683-101_rev-B.indd 25-26
How to Clean your Transmitter
The Transmitter should be removed from the Sensor Support Mount and
cleaned each time you remove a used Sensor (every 5 days) .
1. Wash the Transmitter with mild soap and water .
2. Rinse the Transmitter thoroughly under
running water .
3. Dry the Transmitter thoroughly with a clean,
soft, lint-free cloth or paper towel .
icon and
• Shake and blot any water out of the
Transmitter's contact points .
4. Make sure that the contact points are dry and clean . Check for
apparent signs of damage such as bent contact points .
How to Clean your Receiver
1. Wipe the outside of your Receiver with a clean, soft, lint-free cloth or
paper towel lightly dampened with either a mild soapy solution or
70% isopropyl alcohol . Always be careful not to get water or any
other substance in the USB or test strip ports .
2. Use a clean, soft, lint-free cloth or paper towel to
remove any remaining soap or alcohol .
CAUTIONS:
• Do NOT immerse the Receiver in water or any other liquid . Avoid
getting water or any other substance in the USB and test strip ports .
• Do NOT clean your Receiver with steam .
• Do NOT use adhesive remover wipes or solutions containing ether
or ether-containing components for cleaning or removing residual
adhesive from the Transmitter or Receiver . These solutions can
damage the casings of the Transmitter and Receiver .
Contact Points
How to Clean your Receiver Skin
1. Remove the Receiver Skin .
2. Wash the skin in mild soap and water and dry thoroughly .
3. Check to make sure the inside of the skin
is completely dry before putting it back on
the Receiver .
12 May 2012
320
117
180
mg/dL
40
Graph
Menu
14:30
Disposal
This product should be disposed of in accordance with all applicable
local regulations related to the disposal of electronic equipment,
batteries, sharps and potentially biologically contaminated materials .
Contact Customer Care for further information on the appropriate
disposal of system components .
The Transmitter must not be disposed of via standard waste
collection . Separate collection for electrical and electronic
equipment waste per Directive 2002/96/EC in the European
Union is required .
26
1/7/15 11:43 AM