Sanyo PLC-ET30L Service Manual page 43

Optical Parts Disassembly
27
Polarized glasses(GB) removal.
1. Remove the Polarized glasses(GB) upward.
Polarized glass(GB)
28
-1 optical base top removal-1.
1. Remove  screws-A(T3X10) and remove the Stopper lens.
Note on Polarized glass handling
When replacing the polarized glass(GB), you must wear the
clean glove and do not touch the glass face.
Fig.27
Stopper lens
-43-
Point marker (Behind)
* Mount the Polarized glass as the point marker
is on the top-right corner.
A
A
Fig.28a