Sanyo PLC-ET30L Service Manual page 41

Optical Parts Disassembly
26
-1
Polarized glass ass'y and optical filter ass'y removal.
1. Remove each 1 screw-A(M.5X6) and remove the stopper.
. Remove the Polarized glass ass'y and remove the Optical filter ass'y.
Polarized glass ass'y
optical filter ass'y
thermistor(tH902)
Spacer
Holder PoL
Polarized glass
Film attached side
faces this side.
Fig.26b
* The optical filter must be used with the specified parts according to the mounted prism assembly type, Type-L or
Type-R. See the parts list for further details.
Stopper
optical filter
A
A
A
Only the B-Polarized glass ass'y
provides these parts.
Holder oF
Marker is printed on
this top side.
-41-
Stopper
optical filter ass'y
Polarized glass ass'y
Fig.26a
Prism side