Navigation telephone control
GENERAL INFORMATION
Refer to your vehicle's handbook for
general information on telephone
setup.
TELEPHONE SETUP
Phonebook categories
Depending on your phonebook entry,
different categories can be displayed
in the navigation unit.
The categories are indicated by an
icon next to the contact entry on the
list
Note: Entries may be displayed
without a category attachment (no
icon will be displayed).
Bond another Bluetooth
phone
Phones stored in the system are
accessible from the main phone
screen.
1. Press the PHONE button.
2. Select Settings.
Settings
Reject all incoming calls
Bluetooth
Select active phone
Select phone to debond
Select active BT device
Select BT device to debond
E97785
3. Rotate the SELECT button and
scroll to Select active phone.
4. Press the SELECT button to
activate selection.
5. Rotate the SELECT button and
scroll to the required phone.
6. Press the SELECT button to
activate selection.
USING THE TELEPHONE
This describes the phone functions
of the navigation unit.
An active phone must be present
and connected.
Even if connected to the navigation
unit, your phone can still be used in
the usual way.
Note: You can exit the phone menu
by pressing any source button
(CD/AUX, RADIO for example).
Phone menu
Press the PHONE button to access
the main phone screen:
On / Off
On / Off
Selection list
Selection list
Selection list
Selection list
30