Navigation Introduction; General Information - Ford CD Navigation system Owner's Manual

Table of Contents

Advertisement

Navigation introduction

GENERAL INFORMATION

Press the relevant button on the unit
bezel to access the system
functions. This will take you into the
selected mode.
One hour mode
To conserve battery power, the
system can be operated in one hour
mode. If the ignition is off, press the
ON/OFF button to switch the system
on. The system will automatically
switch off after one hour.
System notes
WARNING
The front glass on the liquid
crystal display may break if hit
with a hard object. If the glass breaks,
do not touch the liquid crystalline
material. In case of contact with the
skin, wash immediately with soap and
water.
The unit is a highgrade laser product
which uses an invisible laser beam. If
this is handled incorrectly it can emit
dangerous rays. Do not attempt to
look through any openings in the unit.
CAUTION
Do not clean the unit with
solvents or aerosol cleaning
agents. Use only a damp cloth.
Do not apply excessive force to the
front glass.
Do not insert foreign objects into any
of the unit disc drives or media card
slots.
Do not insert more than one disc into
the unit disc drive.
Use only 12 cm (4.7 inches) discs or
8 cm (3.1 inches) discs with a suitable
adaptor.
Do not attempt to open the unit. If
the unit malfunctions consult your
dealer.
Improper use of settings and
connections, other than those
explained in this handbook, can
damage the unit.
Do not turn the ignition key or
attempt to start the engine while the
software is updating.
The system is recommended for use
when the ignition key is turned to the
accessory position or when the
engine is running. If the system is
used extensively when the engine is
not running, care needs to be taken
to avoid draining the battery.
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents