Navigation Features - Ford MyFord Touch Supplement Manual

Navigation features

NAVIGATION FEATURES (IF EQUIPPED)
Note: Your navigation SD card MUST be in the SD card slot in order for
you to access the navigation features.
Your navigation system is comprised of two main features, destination
mode and map mode.
To set a destination, press Dest in the upper right hand corner of the
touchscreen. Then, refer to Setting a destination which follows.
To view the navigation map and the vehicle's current location,
touch the green bar in the upper right hand corner of the touchscreen.
Or, you can also press Dest > Map. Refer to Map mode later in this
section.
To order replacement SD navigation cards, see your authorized
dealer.
Note: Your SD card slot is spring loaded. To remove the SD card, simply
press the card in and the system will eject the card. Do not attempt to
pull the card to remove it as this could cause damage.
SETTING A DESTINATION
To set a destination:
1. Press 'Dest' on the top right corner of the screen.
2. Choose to set a destination using any of the following:
• My Home
• Favorites
• Previous Destinations
• Point of Interest (POI)
• Emergency
3. Follow the highlighted text fields to enter any necessary information.
Note that any order of entry is acceptable. For address destination entry,
the Go! button will appear once all the necessary information has been
entered. Pressing the Go! button will trigger the display of the address
location on the map.
4. Select 'Set as Dest' to make this your destination. You can choose to
'Set as Waypoint' to have the system route to this point on the way to
your current destination. You can also choose to save the destination as a
Favorite.
Note: Any Avoid Areas which have been selected are also considered in
route calculation.
56
See End User License Agreement at the end of this book
2011 HMI-2 Gen 2 (ln1)
Supplement, 1st Printing
USA (fus)
• Street Address
• Intersection
• City Center
• Map