Table of Contents
Advertisement
Navigation telephone control - Vehicles With: CD Navigation
GENERAL INFORMATION
Refer to your vehicle's handbook for
general information on telephone setup.
TELEPHONE SETUP
Phonebook categories
Depending on your phonebook entry,
different categories can be displayed in
the navigation unit.
The categories are indicated by an icon
next to the contact entry on the list
Note: Entries may be displayed without a
category attachment (no icon will be
displayed).
Bond another Bluetooth phone
Phones stored in the system are accessible
from the main phone screen.
1.
Press the PHONE button.
2. Select Settings.
3. Rotate the SELECT button and scroll
to Select active phone.
Settings
Reject all incoming calls
Bluetooth
Select active phone
Select phone to debond
Select active BT device
Select BT device to debond
E97785
System
4. Press the SELECT button to activate
selection.
5. Rotate the SELECT button and scroll
to the required phone.
6. Press the SELECT button to activate
selection.
USING THE TELEPHONE
This describes the phone functions of the
navigation unit.
An active phone must be present and
connected.
Even if connected to the navigation unit,
your phone can still be used in the usual
way.
Note: You can exit the phone menu by
pressing any source button (CD/AUX,
RADIO for example).
Phone menu
Press the PHONE button to access the
main phone screen:
24
On / Off
On / Off
Selection list
Selection list
Selection list
Selection list
Advertisement
Table of Contents
