Related Manuals for Fervi 0444
Summary of Contents for Fervi 0444
- Page 1 OPERATION AND MAINTENANCE MANUAL Digital Paint Stripper Art. 0444 ORIGINAL INSTRUCTIONS...
- Page 2 Manual on the date of issue, as listed on this page; however, the product may be subject to potentially major technical changes in the future, without the Manual being updated. Therefore, see FERVI for information about modifications that could be implemented. REV. 1 November 2013...
-
Page 3: Table Of Contents
HARDWARE CONTENTS PRECAUTIONS WITH REGARD TO ELECTRIC SHOCK........4 Technical support......................4 DESCRIPTION OF THE PAINT STRIPPER AND INTENDED USE ....5 Technical specifications ....................6 IMPROPER USE AND CONTRAINDICATIONS..........6 COMMISSIONING..................7 Installation ........................7 HOW TO USE ..................... 7 Power On / Off......................7 Using the paint stripper for "stripping paint"..............7 Other Uses ........................8 MAINTENANCE AND CLEANING .............. -
Page 4: Precautions With Regard To Electric Shock
HARDWARE 1 PRECAUTIONS WITH REGARD TO ELECTRIC SHOCK Risks associated with electric shocks Check that the power plug is disconnected before touching live parts. Make sure the power supply complies with the machine's required voltage and frequency requirements. ... -
Page 5: Description Of The Paint Stripper And Intended Use
2 DESCRIPTION OF THE PAINT STRIPPER AND INTENDED USE The Paint Stripper (Art. 0444) is a device that produces a powerful jet of hot air, to be used exclusively for the removal of layers of paint. It is intended for indoor use. Do not expose to rain or moisture and always store indoors. -
Page 6: Technical Specifications
HARDWARE 2.1 Technical specifications Voltage 230 V Frequency 50 Hz Power 2000 W Step I 300 l/min Airflow Step II 300 l/min Step III 500 l/min Step I 70° C Air temperature Step II 70° - 600 °C Step III 70°... -
Page 7: Commissioning
HARDWARE 4 COMMISSIONING 4.1 Installation Open the plastic case containing the paint stripper and all the accessories. Lay the paint stripper on the workbench. 5 HOW TO USE 5.1 Power On / Off Insert the plug into a 230 V (50 Hz) socket. To remove the plug, hold it by the body and never pull by the cord. -
Page 8: Other Uses
HARDWARE N.B. The paint stripper is designed to remove water and oil-based paints. Conversely, it is not suitable to deal with fillers. Select the operating mode on the paint stripper by moving the four-position switch located on the back of the handle. ... -
Page 9: Maintenance And Cleaning
HARDWARE 6 MAINTENANCE AND CLEANING The purpose of this chapter is to provide all the cadences and maintenance procedures necessary to maintain the efficiency of the Paint Stripper. Frequency INTERVENTION Daily Weekly 1. General visual inspection 2. General cleaning 3. Clean the air outlet nozzle 1.
Need help?
Do you have a question about the 0444 and is the answer not in the manual?
Questions and answers