Advertisement
DESCRIPTION OF CONTROLS
SPEED
CLICK-OFF
ON
OVERLOAD
ON
CLICK-ON
+
OFF
-
-
ON
OFF
+
4
EMERGENCY STOP BUTTON
In the event of an emergency hit the button, all
controls are killed and the machine stops.
To reset, turn in the direction of the arrow to
release the button.
ERROR
CODE
Press the headlight ON/OFF push to switch on,
press again to switch off.
Press the beacon ON/OFF push to switch on,
press again to switch off.
NOTE: The beacon is an optional extra fitting.
Press the button to sound the warning horn.
The battery condition indicator shows the charge
state of the battery.
If the red indicator lights continuously then the
machine will shortly stop because the battery has
during use to a predetermined level beyond which
battery damage will result. All operation will stop
except traction and the recovery tank discharge
pump, so allowing you to empty the recovery tank
and return to the charging point.
The display normally shows the operating value of
the brush pressure. Pressing the H/P button will
display the total hours the machine has run,
pressing it again will show the additional minutes.
After a short time the display will revert to the
brush pressure indication.
EMERGENCY AND AUXILIARY CONTROLS
H
ON
OFF
ON
OFF
_
+
ERROR
CODE
P
21
Advertisement
