Introductory Information; Commissioning; Your System Is Preset At The Factory; Multi-Boiler System - Viessmann VITODENS Operating Instructions Manual

Introductory information

Commissioning

The commissioning and matching up
of the control unit to local conditions
and the structural characteristics of
the building must be carried out by
your heating contractor.

Your system is preset at the factory

The control unit is already adjusted to
"Heating and hot water" in the factory,
i.e. the system provides DHW and
central heating (if a DHW cylinder is
installed).
Your heating system is therefore
ready for use.

Multi-boiler system

You only require the Vitotronic 300-K
operating instructions if the boiler is
used in a multi-boiler system in con-
junction with a Vitotronic 300-K con-
trol unit. These instructions also
include the operating steps for boiler
control.
6
As the user of new combustion equip-
ment, you may be obliged to notify
your local flue gas inspector of the
installation [check local regulations].
Your local flue gas inspector will also
inform you [where appropriate] about
work he may be required to perform
on your combustion equipment (e.g.
regular checks, cleaning).
You may change the factory settings
in accordance with personal require-
ments.
All data is saved in case of power fail-
ure.