Adjusting the room temperature
In addition to the boiler control unit, a separate room temperature controller (e.
g. Vitotrol 100 remote control) must be installed in one of the living rooms, if the
heating system is to be regulated in accordance with the required room tem-
perature.
Please make any adjustments using
the relevant operating instructions.
Adjusting the boiler water temperature
If a remote control unit is connected:
You set the room temperature on the remote control.
Set the boiler water temperature sufficiently high so the required room tempera-
ture can be achieved.
Press the following keys:
1. O
for "Boiler temp.setpt."; the
current temperature will
flash.
Setting temperatures
Please also note:
"Htg.+ DHW"G must be selected.
The boiler water temperature must
be set sufficiently high.
All thermostatic radiator valves
must be fully open in the room
where the control unit is installed.
2. a/b for the required tempera-
ture.
3. d
to confirm; the temperature
no longer flashes and is
saved.
13