User Manual of Digital Video Recorder
5.1 Configuring Recording Parameters
Before you start:
1. Make sure that the HDD has already been installed. If not, please install a HDD and initialize it.
(Menu>HDD>General)
2. Click Advance to check the storage mode of the HDD.
1) Whether the HDD mode is Quota, please set the maximum record capacity. For detailed information,
see Chapter 10.5 Configuring Quota Mode.
2) If the HDD mode is Group, you should set the HDD group. For detailed information, see Chapter 5.9
Configuring HDD Group for Recording.
Steps:
1. Enter the Record settings interface to configure the encoding parameters:
Menu>Record>Parameters
2. Set the parameters for recording.
Lo-Call 1890 866 900
Figure 5. 1 HDD- General
Figure 5. 2 HDD- Advanced
Figure 5. 3 Record Parameters
66
www.cctvireland.ie
shop@cctvireland.ie