Front Panel Operation; Using The Mouse In Live View - HIKVISION DS-7104HGHI-SH User Manual

User Manual of Digital Video Recorder

3.2.1 Front Panel Operation

This function is not supported by DS-7200HGHI-SH and DS-7100-SH series.
Functions
Show single screen
Show multi-screen
Manually switch
screens
Auto-switch
Playback

3.2.2 Using the Mouse in Live View

Name
Menu
Single Screen
Multi-screen
Previous Screen
Next Screen
Start/Stop
Auto-switch
Start Recording
Add IP Camera
Quick Set
Playback
PTZ Control
Aux Monitor
Lo-Call 1890 866 900
Table 3. 4 Front Panel Operation in Live View
Front Panel Operation
Press the corresponding Alphanumeric button. E.g. Press 2 to display only the
screen for channel 2.
Press the PREV button.
Next screen: right direction button.
Previous screen: left direction button.
Press Enter button.
Press Play button.
Table 3. 5 Mouse Operation in Live View
Description
Enter the main menu of the system by right clicking the mouse.
Switch to the single full screen by choosing channel number from the dropdown
list.
Adjust the screen layout by choosing from the dropdown list.
Switch to the previous screen.
Switch to the next screen.
Enable/disable the auto-switch of the screens.
The dwell time of the live view configuration must be set before using Start Auto-switch.
Start recording of all channels, Normal Record and Motion Detection Recording
are selectable from the dropdown list.
A shortcut to enter the IP camera management interface.(For HDVR series only)
Output Mode is configurable with Standard, Bright, Gentle and Vivid options.
Enter the playback interface and start playing back the video of the selected
channel immediately.
A shortcut to enter the PTZ control interface of the selected camera.
Switch to the auxiliary output mode and the operation for the main output is
disabled.
If you enter Aux monitor mode and the Aux monitor is not connected, the mouse
45
www.cctvireland.ie shop@cctvireland.ie