Configuring Hdd Error Alarms - HIKVISION DS-7104HGHI-SH User Manual

User Manual of Digital Video Recorder

10.9 Configuring HDD Error Alarms

Purpose:
You can configure the HDD error alarms when the HDD status is Uninitialized or Abnormal.
Steps:
1. Enter the Exception interface.
Menu > Configuration > Exceptions
2. Select the Exception Type to HDD Error from the dropdown list.
3. Check the checkbox(s) below to select the linkage action(s) for HDD error, as shown in Figure 10. 25.
The linkage actions can be selected to: Audible Warning, Notify Surveillance Center, Send Email and
Trigger Alarm Output.
Trigger alarm output is applicable to the DS-7300HGHI&HQHI-SH and DS-8100HGHI&HQHI-SH.
Please refer to Chapter 8.8 Setting Alarm Response Actions.
4. When the Trigger Alarm Output is selected, you can also select the alarm output to be triggered from the list
below.
5. Click the Apply button to save the settings.
Lo-Call 1890 866 900
Figure 10. 25 Configure HDD Error Alarm
168
www.cctvireland.ie shop@cctvireland.ie