Call Transfer; Blind Transfer - TIPTEL 3210 User Manual

can use dynamic forward to transfer all the incoming calls forward to the number inputted
when the phone is ringing.
Forward: Enable call forward feature, Options as follows：
Always forward: All the incoming calls will be transferred unconditionally to specified
 number.
Busy Forward: The incoming calls will be transferred to specified number when the
 phone is busy.
No answer Forward: The incoming calls will be transferred to the specified number
 when the ring tone is time out without answer.
To configure Call Forward via Phone interface:
1. Press Menu -->Features-->Call Forward-->Enter, or just press R key to enter Call Forward
interface;
2. There are 3 options: Always, Busy, and No Answer.
3. If User chooses one of them, enter the phone number User wants to forward to receiving
party. Press Save to save the changes.

3.8.Call Transfer

You can use the following two ways to transfer talking to the other party：
Blind Transfer: Transfer talking directly to the other party without any negotiation.
 Consultation Transfer: Transfer talking to the other person involved after the other
 person involved answer the incoming and with consultation.
3.8.1.

Blind Transfer

1. Press the Trans soft key during the talking;
2. Enter the Trans number interface, and then Input the number you will transfer to;
3. Press the R key or the Trans soft key to transfer the hold talking to the number you want to
transfer to;
4. Return to the Idle automatically ;
15