Event Setup - D-Link DCS-2103 User Manual

Section 3: Configuration
In a typical application, when motion is detected, the DCS-2103 sends images to a FTP server or via e-mail as notifications. As shown in the
illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is
triggered, a specified action will be performed. You can configure the Network Camera to send snapshots or videos to your e-mail address or FTP
site.
To start plotting an event, it is suggested to configure server and media columns first so that the Network Camera will know what action shall be
performed when a trigger is activated.
D-Link DCS-2103 User Manual

Event Setup

Event Condition
ex.
Motion detection,
Periodically, Digital input,
System reboot
(what to send)
ex.
Snapshot, Video Clips
Action
Media
(where to send)
ex.
Email, FTP
Server
39