Section 3: Configuration
In this section, you may back up, restore and reset the camera configuration, or reboot the camera.
Save To Local Hard Drive:
Local From Local Hard Drive:
Restore to Factory Default:
Reboot Device:
Enable Schedule Reboot:
D-Link DCS-2103 User Manual
You may save your current camera configuration as a file
on your computer.
Locate a pre-saved configuration by clicking Browse and
then restore the pre-defined settings to your camera by
clicking Load Configuration.
You may reset your camera and restore the factory
settings by clicking Restore Factory Defaults.
This will restart your camera.
You can schedule the camera to reboot according to a
schedule. Select the days and time you want the camera
to automatically reboot.
System
54