Using A Second Receiver - King Quest VQ4100 Owner's Manual

If you wish to start a new scan (for example, the unit gets moved and you lose reception):
Pressing the power injector's RESET button is the preferred method to start a new scan, but there are two
alternate methods as well:
• Disconnect and reconnect the coax from the MAIN port on the antenna unit.
• Press the RESET button on the receiver (this option works for select receivers only,
such as models D12, H24, and HR24).
You can connect a second receiver and TV to the AUX port on the antenna unit.
Second receiver must be confi gured the same as
the main receiver (see Section 3, page 3).
Second receiver must not be a SWM only receiver.
All components sold
separately.
If your main receiver has a second "satellite in" port and built in DVR, you can connect this input to the AUX
port to record programs on a different channel than the one you are watching.
5

USING A SECOND RECEIVER

Page 5