Troubleshooting; Security Feature - King Quest VQ4100 Owner's Manual

SYMPTOM
Antenna unit does not scan
for satellites.
Antenna unit scans but no
picture on TV.
Antenna unit scans but does
not fi nd satellite.
Picture on TV goes in and out. Temporary obstruction of signal. Heavy rain or snow may cause loss of signal.
The KING Quest can be secured to an object using a cable looped thru the handle.
Page 10
7

TROUBLESHOOTING

POSSIBLE CAUSE
No power to antenna unit.
Antenna unit needs to be reset.
Improper connections made.
Line of sight obstruction.
8

SECURITY FEATURE

COURSE OF ACTION
Make sure antenna unit is connected to power
injector.
Make sure power injector is powered (LED will be lit).
Press RESET on power injector.
Make sure antenna unit is connected to power
injector, and power injector is plugged in.
Make sure powered receiver is connected to power
injector and TV.
Move antenna unit to have a clear view of the
southern sky. Press RESET on power injector to start
a new scan.
Reception will improve as weather clears.
Make sure nothing is temporarily blocking view to the
southern sky (like tree branches blowing in the wind).
NOTE:
The optional KING Controller can be used as
an alarm to deter theft as well (see next page).