2
APPLY RUBBER FEET TO ANTENNA UNIT
Lay the antenna unit on a soft, non-scratching surface, and apply the (3) rubber feet.
IMPORTANT!
If you are going to roof mount the antenna unit,
DO NOT apply the rubber feet.
See the roof installation section later in this manual.
IMPORTANT! The KING Quest will not work with SWM only receivers.
For a list of compatible receivers, see www.kingconnect.com/dtv-receivers.
You must confi gure the receiver as shown above. Once completed, the receiver will default to these settings
unless they are changed.
You must have a DIRECTV programming subscription.
The KING Quest will not receive channels broadcast from DIRECTV's Ka band satellites at 99° and 103°.
3
SET UP TV AND RECEIVER
Set up your TV and receiver.
All components
sold separately.
Page 3