Screen Name : Navi Rgb Test Screen - Kenwood KNA-DV3100 Service Manual

QQ
3 7 63 1515 0

Screen Name : NAVI RGB test screen

Functions outline
• This is the screen for testing the NAVI color display.
Screen appearance
NAVI RGB TEST
1
White
A color buttons is
chosen.
TE
L 13942296513
3
Display details
q Color bar
• Bar display for the following colors : white, red, green, blue
and black.
w Selection button
• When a button corresponding to a color is pressed, the
selected color is displayed on the whole screen.
e Whole screen display
www
• The selected color is displayed on the whole screen.
• When other parts of the screen is pressed, the screen goes
back to the RGB test screen.
.
r When terminated, the screen goes back to the NAVI Manual
check screen.
2
Red Green blue black
The selected color is
displayed on the whole
screen.
Touch screen
x ao
y
i
TEST MODE
8
Screen Name : NAVI Voice Output test screen
Functions outline
• In this screen, the ADPCM output is tested.
Screen appearance
4
NAVI VOICE OUTPUT TEST
ADPCM:
Display details
q and w are ADPCM voice test buttons.
• The following ADPCM voices (sine wave of 1kHz/maximum
Q Q
3 6 7 1 3
since wave of 1kHz) are output for five seconds.
NORMAL (q) Voice ID : 00020015
MAX (w) Voice ID : 00020014
However, if no map disk is not inserted, the ADPCM voices
are not output.
e When terminated, the screen goes back to the NAVI Manual
check screen.
• In this screen, the beep is not sounded when q and w but-
tons are pressed.
u163
.
KNA-DV3100/DV3200
2 9 9 4 2 8
ON (Normal)
ON (Max)
1 5 0 5 8 2 9 9 4
m
co
9 9
3
2
1
2 8 9 9
9