Screen Name : Navigation Information Screen; Screen Name : Vehicle Signals Screen - Kenwood KNA-DV3100 Service Manual

QQ
3 7 63 1515 0

Screen Name : Navigation information screen

Screen appearance
NAVIGATION INFO
1 Vehicle Signals
3 Reset Position
Display details
q VEHICLE/GYRO/SIGNALS screen is accessed.
w GPS information screen is accessed.
e Reset Position screen is accessed.
r The screen returns to the On-screen diagnostics screen.
TE
L 13942296513

Screen Name : Vehicle signals screen

Functions outline
• In this screen, the vehicle signals input to the Navi ECU are
checked.
• The data is updated when the information changes.
Screen appearance
VEHICLE/GYRO SIGNALS
Vehicle Info.
ILL: ON PKB: ON
Speed (kph,mpk)
SPD Pulse Count
Distance Calibration (mm)
Gyro Info.
Voltage / Offset (mV)
Relative Bearing (° )
Gyro Sense
1
www
.
TEST MODE
2
GPS Information
REV: OFF
: 160, 100
: XXXXX
: 200
: 2500, 2495
: 359.0
Reset
: 1.000
2 9
x ao u163
y
i
KNA-DV3100/DV3200
2 9
8
Display details
q When ILL signal is displayed :
• The condition of the PARK LAMP is displayed as : ON/OFF.
4
w When PKB signal is displayed :
• The condition of the parking brake signal is displayed as :
ON/OFF
e When REV signal is displayed :
• The condition of the REV signal is displayed as : ON/OFF.
r Vehicle speed condition
• The vehicle speed is displayed in kph/mph.
The speed is displayed in maximum of 3 digits in LSB 1.
t The count value of the SPD pulses is displayed. (The time
of access to the screen is set to 0. The count is displayed
in maximum of 5 digits in LSB 1 with the maximum of 65535
and when this is exceeded, the value is counted again from
0.)
y Distance adjustment information
• The obtained value is displayed.
The value is displayed in maximum of 3 digits in LSB 1.
u, i, o Gyro signal display
• Gyro output voltage value is displayed in mV.
The value is displayed in maximum of 4 digits in LSB with
Q Q
3 6 7 1 3 1 5
1mV as the unit.
• Gyro output voltage value (left) and adjusted reference volt-
age (right) are displayed in mV.
The value is displayed in maximum of 4 digits in LSB with
1mV as the unit.
• The relative direction is displayed. (The time when the Navi
system is activated is set to 0.)
The value is displayed in maximum of 4 digits in LSB with
0.1 degree as the unit.
11
• The obtained value for the gyro sensitivity is displayed.
3
The value is displayed in maximum of 4 digits in LSB with
0.011 as the unit.
4
!0 Reset button for the gyro sensitivity obtained value
5
• This button is for resetting the gyro sensitivity obtained value.
6
!1 The screen returns to the Navigation Information screen.
7
8
10
co
.
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9
11