Yardworks 060-3895-8 Instruction Manual page 15

model number 060-3895-8 | contact us: 1.866.523.5218
Symbol Name
EXTENSION
CORDS
AVOID ELECTRIC
SHOCK
KEEP VISITORS
AND CHILDREN
AWAY
INSPECT THE
LOG
DO NOT
OVERREACH
AVOID
INJURY FROM
UNEXPECTED
ACCIDENTS
Designation/Explanation
Improper use of extension cords may cause inefficient operation
of the log splitter, which may result in overheating. Verify that the
extension cord is no longer than 32.5' (10 m) and that its cross-
section is no less than 1/8" (2.5 mm), in order to allow sufficient
current to flow to the motor. Avoid use of loose and inadequately-
insulated connections. Connections must be made with protected
material that is suitable for outdoor use.
Verify that the electric circuit is adequately protected, and that
it corresponds to the power, voltage, and frequency of the
motor. Verify that there is a ground connection and a regulation
differential switch upstream. Ground the log splitter. Prevent
contact between your body and grounded surfaces such as pipes,
radiators, ranges, and refrigerators. Never open the push-button
box on the motor. If it becomes necessary to open this box,
contact a qualified electrician. Do not allow your fingers to touch
the metal prongs of the plug when plugging in or unplugging the
log splitter.
The log splitter must always be operated by only one person.
Always keep other people a safe distance away from the work
area, especially when the log splitter is in use. Never ask
another person for help in freeing a jammed log.
Verify that there are no nails or foreign objects in the logs
that are to be split. The ends of the logs must be cut square.
Branches must be cut off flush with the trunk.
Inspect the log splitter for any malfunctioning or damaged
components including the splitting wedge for cracks and
deformation.
Do not work on a slippery floor. Keep proper footing and balance at
all times. Never stand on the log splitter. Serious injury could occur
if the tool tips or is accidentally jarred. Do not store anything above
or near the log splitter such that someone might stand on the tool in
order to reach it.
Always pay attention to the movement of the log pusher. Do not
attempt to load a log until the log pusher has stopped. Keep
hands out of the way of all moving parts. Do not try to remove
split logs until the tool has totally competed its work cycle.
15