Sanyo PLC-XF30 Service Manual page 9

Mechanical
disassemblies
B
B
B
B
C
B
(a)
C
C
A
C
A
(a)
Black color
White color
K7A4
B
B
No mark and clear tube.
B
A
B
B
A
A
B
B
A
A
C
C
C
Black mark and clear tube
1.
or no mark and black tube.
K7A3
K7B3
1. Remove 5 screws A and remove the Panel ballast.
K7B4
2. Remove the connectors. Remove 8 screws B and
remove the 2 Lamp ballast assemblies.
Figure (a)
2.
removal.
1. Remove 2 screws-A. Push part(a) and pull
the Cabinet-front-bottom down.
2. Remove 4 screws B and remove the Cabinet
front top.
3. Remove 7 screws C and remove the Cabinet
front.
-9-
Panel ballast and Lamp ballast
Assemblies removal.
Note
: To connect the connector.
Be careful to connecting the connec-
tors of the Lamp ballast assemblies.
Refer to the figure-(a).
Cabinet front bottom, Cabinet
front top and Cabinet front
Note :
Be careful not to damage Hook. The
cabinet-front-bottom is being fixed
with cabinet-front-top by hook.