Sanyo PLC-XF30 Service Manual page 34

15. Flicker reduction
Input mode
Input signal
Set the image to "Service mode."
Adjust each color for minimum flickers with the Volume + - buttons.
Group No. Screen
200- 17 Display only green light.
200- 18 Display only red light.
200- 19 Display only blue light.
16. White balance adjustments
Input signal
Set the image to "Service mode."
Adjust each item value with the Volume + and - buttons and to obtain better white
balance.
Group No. Lamp mode
930- 0
210- 14 and 16 2 lamp mode
200- 14 and 16 2 lamp mode
930- 1
211- 14 and 16 Lamp-1 of 1 lamp mode
930- 2
212- 14 and 16 Lamp-2 of 1 lamp mode
Note :
. If the data value appears "11" on the screen, go to next item.
. If the data value appears "0" on the screen, set the data value to "10"
and go to next item.
. If the data value appears "99" on the screen, wait until it is changed to
"0". Then set the data value to "10" and go to next item.
Computer.
1 dot line computer signal
16 step gray scale signal
Input mode
Adjustment value.
See note.
AV Better white balance.
Computer Better white balance.
See note.
AV Better white balance.
See note.
AV Better white balance.
-42-