Sanyo PLC-XF30 Service Manual page 12

A
A
E
E
E
C
C
D
C
D
C
C
C
D
D
D
D
D
C
D C
GX4
GX4
Adjustable foot.
Adjustable foot.
Assembly fan
A
A
B
FN909
C
C
C
C
E
E
E
E
E
A
A
A
B
B
B
B
B
B
B A
A
B B
F
F
F
F
F
F
-12-
7. Fans(FN906, FN909 and FN910)
removal.
NOTE :
Be careful of the attachment direction of Fan.
FN906 is Fan for an exhaust.
B
B
B
1. Remove 4 screws A and remove the fan FN909 and remove the
fan FN910.
2. Remove 4 screws B and remove the assembly fan.
3. Remove 4 screws C and remove the fan FN906.
8. Fans(FN903, FN904, FN905, FN907 and FN908),
AC SW unit, Handle and Adjustable feet removal.
NOTE :
Be careful of the attachment direction of Fan.
FN908 is Fan for an exhaust.
Mark the Fans as they are removed from the cabinet bottom so
that they may be reassembled in the same location from which
they were removed.
1. Remove 5 screws A and remove the duct for FN907 and remove the Fan (FN907).
2. Remove 9 screws B and remove the Fans (FN903 and FN904) and remove the duct
for FN903/4.
3. Remove 8 screws C and remove the holder for FN908 and remove the Fan
(FN908).
4. Remove 8 screws D and remove the holder for FN905 and remove the Fan
(FN905) and remove the duct for FN905.
5. Remove 8 screws E and remove the AC switch unit.
6. Remove 4 screws F and remove 2 pins F and remove the handle.
7. Remove 8 screws G and remove the adjustable feet.