Sanyo PLC-XF30 Service Manual page 29

Group-no.
210-14 & 16 AV White balance adjustment. 2 lamp mode
200-14 & 16 PC White balance adjustment. 2 lamp mode
211-14 & 16 AV White balance adjustment. Lamp-1 of 1 lamp mode
212-14 & 16 AV White balance adjustment. Lamp-2 of 1 lamp mode
1000-25 AV Color and Tint adjustment
1000-24 AV Color and Tint adjustment
1010-0 AV Green Video signal adjustment
1010-1 AV Green Video signal adjustment
1010-2 AV Red Video signal adjustment
1010-3 AV Red Video signal adjustment
1010-4 AV Blue Video signal adjustment
1010-5 AV Blue Video signal adjustment
5010-0 Component G Video signal adjustment
5010-1 Component G Video signal adjustment
5010-2 Component R Video signal adjustment
5010-3 Component R Video signal adjustment
5010-4 Component B Video signal adjustment
5010-5 Component B Video signal adjustment
0-0 Temperature monitor IC5801 Read only
0-1 Temperature monitor IC2541 Read only
1-0
Atmospheric Pressure monitor
10-0 RS232C Baud rate (0:9600 / 1:19200)
10-0
RS232C RTS/CTS Flow Control (0:Disable / 1:Enable)
111-0 Lamp-1 Lamp illumination time
111-1 Lamp-2 Lamp illumination time
930-0 Lamp mode 2 Lamp Mode
930-1 Lamp mode Lamp-1 of 1 Lamp Mode
930-2 Lamp mode Lamp-2 of 1 Lamp Mode
998-0 Grid Test Pattern Display
Note :
Group-no. 930
If the data value appears "11" on the screen, the lamp
mode is selected.
If the data value appears "0" on the screen, the lamp
mode is not selected. Set the data value to "10."
If the data value appears "99" on the screen, it is period
for cooling of the lamp. Wait until it is changed to "0."
Then set the data value to "10."
Adjustment Item
IC886 Read only
Read only
Read only
(See Note.)
(See Note.)
(See Note.)
-37-
Adjustment Mode
Not designated PC
Caution
:
Other adjustment items are not related to service and a mainte-
nance. Don't change the data values of those adjustment items.
Otherwise it may cause loss of product safety.
AV Component