Cleaning - Danby DDW611WLED Owner's Use And Care Manual

Care and Maintenance
FILTERING
SYSTEM (cont)
CARING FOR THE
DISHWASHER
• Never run the dishwasher without the filters in place.
• The dishwasher must never be used without the filters.
• Improper replacement of the filter may reduce the performance level of
the appliance and damage dishes and utensils.
Open
NOTE: If you follow the steps from Step1 to Step 3, the filter system will be
removed; if you follow the steps from Step 3 to Step 1, the filter system will be
installed.
- Inspect the filters for blockage every time the dishwasher is used.
- By unscrewing the coarse filter you can remove the filter system. Remove any
food remnants and clean the filters under running water.
- The entire filter assembly should be cleaned once a week.
CLEANING THE FILTER
To clean the coarse filter and the fine filter, use a cleaning brush. Reassemble the
filter parts and reinsert the entire assembly in the dishwasher, by positioning it in
the proper location and pressing downward.
When cleaning the filters, handle with care. Otherwise, the filters could be
damaged and the performance of dishwasher could be reduced.
The control panel can be cleaned by using a lightly dampened cloth and dried
thoroughly. For the exterior use a good quality appliance polish wax. Never use
sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.
CLEANING THE DOOR
To clean the edge around the door, you should use only a soft damp cloth. To
• Never use a spray cleaner to clean the door panel as it may damage the
door lock and electrical components.
• Abrasive agents or some paper towels should not be used because of
the risk of scratching or leaving spots on the stainless steel surface.
18
WARNING
Step 1. Rotate the fine filter counter-
clockwise
Step 2. Lift it up.
Step 3. Lift the main filter up.
WARNING
avoid penetration of water into the door
lock and electrical components, do not use
a spray cleaner of any kind.
WARNING