Nokia E5-00 User Manual page 70

70 Connectivity
access point (IAP) for WLAN. Use the
access point for applications that need
to connect to the internet.
A WLAN connection is established when
you create a data connection using a
WLAN internet access point. The active
WLAN connection ends when you end
the data connection.
You can use WLAN during a voice call or
when packet data is active. You can only
be connected to one WLAN access point
device at a time, but several
applications can use the same internet
access point.
When the device is in the offline profile,
you can still use WLAN (if available).
Remember to comply with any
applicable safety requirements when
establishing and using a WLAN
connection.
Tip: To check the unique media access
control (MAC) address that identifies
your device, enter *#62209526# in the
home screen.
WLAN wizard
Select Menu Ctrl. panel
>
Connectivity
>
>
WLAN wiz..
The WLAN wizard helps you to connect
to a wireless LAN (WLAN) and manage
your WLAN connections.
If the search finds WLANs, to create an
internet access point (IAP) for a
connection and start the web browser
using this IAP, select the connection and
Start web browsing.
If you select a secured WLAN, you are
asked to enter the relevant password.
To connect to a hidden network, you
must enter the correct network name
(service set identifier, SSID).
If you already have the web browser
running using the currently active WLAN
connection, to return to the web
browser, select Cont.web
To end the active connection, select the
connection and Disconnect
WLAN internet access points
Select Menu Ctrl. panel
>
Connectivity
>
Options.
Select from the following:
© 2010 Nokia. All rights reserved.
browsing.
WLAN.
>
WLAN wiz. and