Nokia E5-00 User Manual page 169

You can view the EAP plug-ins currently
installed in your device (network
service).
EAP plug-ins
1 To define the EAP plug-in settings,
select Options
point and define an access point
that uses WLAN as a data bearer.
2 Select 802.1x
security mode.
3 Select WLAN security settings
WPA/WPA2
settings.
Use EAP plug-ins
To use an EAP plug-in when you connect
to a WLAN using the access point, select
the desired plug-in and
Enable. The EAP plug-ins enabled for
use with this access point have a check
mark next to them. To not use a plug-in,
select Options > Disable.
To edit the EAP plug-in settings, select
Options > Edit.
To change the priority of the EAP plug-
in settings, select
priority to attempt to use the plug-in
© 2010 Nokia. All rights reserved.
New access
>
or WPA/WPA2 as the
EAP EAP plug-in
> >
Options
>
Options Raise
>
before other plug-ins when connecting
to the network with the access point, or
Options
>
plug-in for network authentication
after attempting to use other plug-ins.
See the device help for more
information on EAP plugins.
Session initiation protocol (SIP)
settings
Select Menu
>
and Connection
The session initiation protocol (SIP) is
used for creating, modifying, and
terminating certain types of
communication sessions with one or
more participants (network service). SIP
profiles include settings for these
sessions. The SIP profile used by default
for a communication session is
underlined.
To create a SIP profile, select
Options
>
default profile
profile.
Settings 169
Lower priority to use this
Ctrl. panel
> >
SIP settings.
>
New SIP profile
or Use existing
Settings
Use
>