Local Login - IC Realtime AVS Series Quick Start Manual

10 HDMI
11 AUDIO OUT
When connect the Ethernet port, please use crossover cable to connect the PC and use the
straight cable to connect to the switcher or router.

6. Local Login

After system booted up, default video display is in multiple-window mode.
Click Enter or left click mouse, you can see the login interface. See Figure 4.
System consists of four accounts:

Username: admin. Password: admin. (administrator, local and network)

Username: 888888. Password: 888888. (administrator, local only)

Username: 666666. Password: 666666(Lower authority user who can only monitor, playback,
backup and etc.)

Username: default. Password: default(hidden user)
Note:
For security reason, please modify password after you first login.
Within 30 minutes, three times login failure will result in system alarm and five times login failure
will result in account lock!
7. Web
Open IE and input DVR address in the address column. For example, if your DVR IP is
10.10.3.16, then please input http:// 10.10.3.16 in IE address column.
System pops up warning information to ask you whether install webrec.cab control or not. Please
click yes button.
If you can't download the ActiveX file, please modify your IE security setup.
After installation, the interface is shown as below. See Figure 5.
Please input your user name and password.
Default factory name is admin and password is admin.
Note: For security reasons, please modify your password after you first login.
High definition
media interface
Audio output port
Figure 4
High definition audio and video
signal output port.
uncompressed high definition video
and multiple-channel data to the
HDMI port of the display device.
Connect to video output device such
as sound box.
It transmits
6