Sharp FU-40SE Operation Manual page 9

2
Mount mounting bracket 1
• Install it after you ask a specialist and you
can get the confirmation of the strength.
• Mount the bracket using the included wood
screws (long screws) so that it level.
Use 4 wood screws (long screws)
M o u n t i n g
bracket 1
Wood screws
(4 units)
Use 3 wood screws (long screws)
M o u n t i n g
bracket 1
Wood screws
(3 units)
3
Mount mounting bracket 2 to the
main unit
Mount the bracket to the back of the main unit
using the included small screws (2 units).
Do not use wood screws
(long screws)
Mounting bracket 2
Small screws
(2 units)
4
Place the 2 cushions
5
Mount the main unit
(1) Align the horizontal positions of mount-
Wood
(2) Hold the bot-
Wood
6
Check the installation
• Check to make sure that the tabs on mount-
ing bracket 2 are securely mounted to the
tabs on mounting bracket 1.
• Check that the power cord is not pinched.
REMOVING THE UNIT
Pull the bottom of the unit towards you and then
lift.
NOTES
• When removing
the unit, use a firm
stand.
• Disconnect the power
cord before remov-
ing the unit.
E-7
Cushions (2 units)
ing brackets 1 and 2 and hook the bracket
2 to bracket 1.
tom of the main
unit, pull the
unit towards
you and then
pull down.