Docomo Style L-04A Instruction Manual page 206

Note
• While information is being received,
• Even when the information arrives, a ring tone does not sound
nor does the terminal vibrate. The illumination does not light/
blink either.
• Information may not be received when the FOMA terminal power
is turned off, while the FOMA terminal is out of service area,
or when the signal reception is weak. Press Q in Stand-
by to receive information, then the obtained information is
displayed automatically as the ticker on the Stand-by display.
Also, information may not be received if the default settings
are kept. In this case, press Q in Stand-by to receive and
automatically display the information as the ticker on the
Stand-by display.
• In some conditions, information may be received only when a
channel list is displayed.
• If you change the access point in "Host selection", the access
point of i-Channel is also changed (normally, you do not need to
change these settings).
• The ticker will not appear after i-Channel is unsubscribed.
• When i-motion is set to the Stand-by display, the ticker will not
appear during playback.
• There may be a message notifying of failure to acquire channel
information if:
- the i-Channel access point has been changed
- the UIM has been replaced
• Touch operation is not available on i-Channel screen.
0
i-mode/i-motion/i-Channel
blinks.
i-Channel Setting
Setting i-Channel
You can set whether to display the ticker on the Stand-by
display or to set the ticker display speed. Also you can delete
all i-Channel information on the FOMA terminal.
a Stand-by display ▶ I ▶ "i-Channel" ▶
Perform the following operations
[i-Channel list]
Display the Channel list screen.→P203
[Ticker setting]
Ticker display : Set whether to display a ticker on the Stand-by
display.
Ticker speed : Set the ticker display speed.
Font size : Set the ticker font size.
Font color : Set the ticker font color.
[Reset i-Channel]
Delete i-Channel data downloaded on the FOMA terminal and restore
Ticker setting to defaults.
Note
<Ticker display>
• If you unsubscribe the i-mode service before unsubscribing
i-Channel, the "Ticker display" setting remains.