Indicator Lamps; Electronic Speedometer; Combination Switch - KTM 625 LC4 SUPERCOMPETITION Owner's Handbook Manual

1
2
3
A
B
C
Indicator lamp
The green control lamp
the same rhythm as the flashing indicator.
The blue control lamp

Electronic speedometer

The electronic speedometer display is activated as soon as the engine is
switched on and the motorcycle starts to move.
The engine must be started in order for the speedometer to be supplied
with electricity from the generator. The display is not activated until the
front wheel has made 1 revolution (impulse for speedometer).
TEST
All of the display elements will light up for 1 second for the function test.
WS (wheel size)
The display will change and briefly show the diameter of the front wheel in
millimeters. Then it automatically switches to the ODO mode.
ODO
The ODO mode shows the speed and the total kilometers traveled.
The information will disappear in the display when the front wheel stops
turning for 1 minute.
NOTE:
A Tripmaster switch (part no 583.14.069.244) is available as an accessory
and enhances the electronic speedometer by providing the following
functions:
2x Tripmaster
2x chronometer for the lap time
Average speed
Maximum speed
Service hours
Clock
Display in miles

Combination switch

The light switch has 3 switch positions.
4
A
= Light off
B
= Low beam light
C
= High beam light
The red short circuit button
switch pressed, until the engine stops. With the button
sound.
1
flashes when the indicator is working in
2
lights up when the high beam is on.
3
serves to switch off the engine. Leave the
5
4
the horn will