Advertisement
Quick Links
Download this manual
See also:
User Manual
1
What's on your package?
1. One VXC series card
2. One ICP DAS software CD
3. One Quick Start Guide (this document)
2
COM Port Mapping
Please set SW1 dip-switch (COM Selector) to 0x05 (1 and 3 "ON",
others "OFF").
This forces the VXC card to use COM5, COM6, COM7 and COM8.
Quick Start Guide for
VXC-114U/144U/144iU Series
VXC-114U/144U/144iU
Written by Tammy Chuang
Version 1.025
December 2007
SW1
Series
Quick Start Guide --- 1
Advertisement
Related Manuals for ICP DAS USA VXC-114U Series
Summary of Contents for ICP DAS USA VXC-114U Series
- Page 1 Quick Start Guide for VXC-114U/144U/144iU Series Written by Tammy Chuang Version 1.025 December 2007 What’s on your package? 1. One VXC series card 2. One ICP DAS software CD 3. One Quick Start Guide (this document) COM Port Mapping Please set SW1 dip-switch (COM Selector) to 0x05 (1 and 3 "ON", others "OFF").
- Page 2 SW1 setting table SW1 DIP Switch Board ID=0x00 (Default) COM = Auto-defined Board ID=0x03 COM = 3/4/5/6 Board ID=0x05 COM = 5/6/7/8 Board ID=0x07 COM = 7/8/9/10 Board ID=0x09 COM = 9/10/11/12 Board ID=0x14 COM = 20/21/22/23 Board ID=0x1E COM = 30/31/32/33 Board ID=0x28 COM = 40/41/42/43 Board ID=0x32...
-
Page 3: Installing Windows Driver
Installing Windows Driver 1. Launch the Windows NT/2K/XP/2003/Vista32 driver. You can get the driver from: CD:\Napdos\multiport\windows\ http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/multiport/windows/ 2. Click “Next>” button to start installation. 3. Click “Next>” button to install driver into the default folder. 4. Check “Create a desktop icon” and click “Next>” button. 5. -
Page 4: Pin Assignment
1. Select “ Start/Settings/Control Panel “ and double click the “system” icon. 2. Click the “Hardware” tab and then click the “Device Manager” button. 3. Check if the COM ports of VXC card are listed correctly. Pin Assignment VXC-114U Pin Assignment and Wiring Terminal RS-232 Null Modem Cable Wiring Assignment... - Page 5 VXC-144U/144iU Pin Assignment and Wiring Pin Assignment Terminal Pin Assignment RS-485 Cable Wiring \N.C. CTS3-(A) System System TxD3-(A)/Data3-(A) RxD3-(A) GND/VEE3 RTS3-(A) DATA – DATA – CTS3+(B) RTS3+(B) TxD3+(B)/Data3+(B) RxD3+(B) DATA + DATA + CTS4-(A) TxD4-(A)/Data4-(A) RxD4-(A) GND/VEE4 RTS4-(A) CTS4+(B) RS-422 Cable Wiring RTS+4(B) TxD4+(B)/Data4+(B) System...
- Page 6 Wire Port3 and Port4 for VXC-114U (RS-232). Pin Assignment Name Pin Assignment Name TxD3 RxD4 RxD3 TxD4 DN-37 wiring for self-test 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Wire Port3 and Port4 for VXC-144U/144iU (RS-485).
- Page 7 Execute the Test2COM.exe program. Get the f ile from: CD:\Napdos\multiport\utility\ http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/multiport/utility/ Double-click Test2COM.exe 2.Check COM7、COM8 Click “Start Test” Test success. Test Result: ***Test OK on 9600, 7N1 *** VXC-114U/144U/144iU Series Quick Start Guide --- 7...
-
Page 8: Additional Information
Additional Information VXC Card Product Page: http://www.icpdas.com/products/Industrial/multi_serial/vxc-144.htm Document： CD:\Napdos\multiport\manual\ http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/multiport/manual/ Software： CD:\Napdos\multiport\ http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/multiport/ DN-37 Product Page: http://www.icpdas.com/products/DAQ/screw_terminal/dn_37.htm The ICP DAS Web Site http://www.icpdas.com Technical support Supplies and ordering information Ways to enhance your device Application story Contact Us Service@icpdas.com Copyright @ 2007 by ICP DAS Co., Ltd. All rights are reserved VXC-114U/144U/144iU Series Quick Start Guide --- 8...