Advertisement
Specifications
Monitor
Specifications
Diagonal:
Picture Tube
Viewable Image Size:
Radius:
Video:
Input Signal
Sync:
Analog input:
Display Colors
Horizontal:
Synchronization
Vertical:
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
Vertical:
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Humidity:
Feet:
Storage Temperature:
Humidity:
Feet:
991 SB
MultiSync
®
FE
Notes
Monitor
19 inch
90° deflection, 0.25/0.27 mm grille pitch,
18 inch
medium short persistence phosphor,
50,000 mm
aperture grille CRT, multi-layered,
anti-static screen coating, dark-tint screen
and OptiClear
ANALOG 0.7 Vp-p/75 Ohms
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Unlimited number of Colors
Depends on display card used.
30 kHz to 96 kHz
Automatically
50 Hz to 160 Hz
Automatically
640 x 480 @ 60 to 160 Hz
Some systems may not support
800 x 600 @ 50 to 146 Hz
all modes listed.
832 x 624 @ 50 to 141 Hz
1024 x 768 @ 50 to 116 Hz
NEC-Mitsubishi Electronics Display cites
1152 x 870 @ 50 to 103 Hz
recommended resolution at 85 Hz for
1280 x 1024 @ 50 to 89 Hz ..................... optimal display performance.
1600 x 1200 @ 50 to 76 Hz
1792 x 1344 @ 50 to 68 Hz
356 mm/14.0 inches
Dependent upon signal timing used,
266 mm/10.5 inches
and does not include border area.
366 mm/14.4 inches
Dependent upon signal timing used,
274 mm/10.8 inches
and does not include border area.
AC 100 – 240 V, 50-60 Hz
2.2A @ 100-240 V
442 mm (W) x 443 mm (H) x 447.5 mm (D)
17.4 inches (W) x 17.4 inches (H) x 17.6 inches (D)
22.7 kg
50.0 lbs
+5°C to +35°C / +50°F to +90°F
10% to 90%
0 to 10,000 Feet
-20°C to +60°C / -4°F to +140°F
10% to 90%
0 to 50,000 Feet
NOTE: Technical specifications are subject to change without notice.
11
1-13
screen.
®
Advertisement
Chapters
