Honeywell Lyric Installation Manual page 6

Install your Lyric thermostat
continued
1 wire
2 wire
5
Your app will also tell you whether the
left and right of the wallplate
or down based on your R-wire installation. If your old
thermostat had only one R-wire connected, make sure the
slider tab is pushed up to cover the RC connection. If your
thermostat has two R-wire connections, R and RC, push
the slider tab down.
7
Your thermostat will light up while it starts up - this may
take up to 3 minutes. When the thermostat stops, it will
display a unique network name, for example, Lyric Stat 03.
When you see the unique network
begin your thermostat configuration.
R
R & RC
slider tab on the
needs to be pushed up
I'm looking
for your device.
Download and open
the Lyric app.
Lyric Stat 03
name, touch "OK" to
6
After connecting your wiring, attach the thermostat
gently pressing it to the wallplate.
Turn the power to your unit back on.
FPO
FPO
8
Go to the Lyric app to see how to configure and
personalize your Lyric thermostat. You can also view
lyric.honeywell.com.
additional videos at
by
I'm looking
I'm looking for your device.
for your device.
Download and open
Download and open
the Lyric app.
the Lyric app.
Lyric Stat 03
Lyric Stat 03
LYRIC INSTALLATION GUIDE
6