Voice Recognition Mode - Polaris Slingshot SL 2015 Owner's Manual

Voice Recognition Mode

The radio features voice recognition when a driver headset is connected and turned on. Radio
Bluetooth functionality is dependent on the capabilities of the device. Please see your
device's user manual.
Tip: Make sure the Bluetooth volume on your device is turned all the way up.
The device's connectivity, battery and signal strength are shown on the top of the display.
Initiating a Phone Call
1. To initiate a phone call, press
voice recognition mode.
2. Speak phone commands into microphone.
3. Press and release PRESET or press
while in voice recognition mode to re-send or resume
voice recognition request.
4. When the phone call is initiated, "DIALING" and
either the caller ID or "OUTGOING CALL" will be
displayed.
5. Press MODE to cancel outgoing call if desired.
6. When the call is answered, the screen will display
"CONNECTED".
7. Press and release MODE to end the phone call.
Receiving/Answering Phone Calls
When a phone is paired to DRIVER DEVICE, the audio
system will allow the driver to either answer or reject an
incoming phone call.
When an incoming phone call is received, the screen
will display the information of the caller.
1. Press PHONE to answer the call.
2. Press MODE to reject the call.
3. To end the phone call, press MODE
PHONE to request
PHONE
.
AUDIO SYSTEM
115