General Safety Regulations - basic coatings Dirt Dragon Operator And Parts Manual

The regulations below must be carefully followed in order to avoid harm to the operator and damage to the machine.
• Read all labels on the machine carefully. Do not cover them for any reason and replace them immediately if they become
damaged.
• The machine must be used exclusively by authorized and trained personnel.
• When operating the machine be careful of other people.
• The machine is not designed for cleaning carpets.
• The power cable outlet must be provided with a proper ground.
• Avoid damaging the power cable by crushing, bending, cutting or stressing it.
• Whenever the power cable is damaged, immediately contact a Basic service center.
• Do not mix different types of detergent as this may produce harmful gases.
• Machine storage temperature is between -10°F and 130°F, never store outside under humid conditions.
• Operating conditions: room temperature between 33°F and 100°F with relative humidity between 30% to 95%.
• Only use the machine in closed areas and do not expose it directly to rain.
• Never use the machine in an explosive environment.
• Do not use the machine as a means of transport.
• Never use acidic chemicals which could damage the machine.
• Avoid running the brushes with the machine stopped; this could damage the floor.
• Never vacuum up flammable liquids.
• Do not leave the machine unattended when it is plugged in.
• Do not allow the solution pump to run dry for more than 3 minutes.
• Never use the machine to gather dangerous powders.
• Use a powder fire extinguisher in case of fire. Do not use water.
• Do not hit against shelving or scaffolding.
• The operator must always be equipped with the appropriate personal protective equipment (gloves, shoes, helmet,
glasses, etc.)
• The machine is designed to wash and dry floors simultaneously. Signal the presence of wet floors with suitable signs.
• If the machine does not work properly, perform routine maintenance. Otherwise, request the assistance of our technical
service department.
• When replacing parts ask for ORIGINAL spare parts from your Authorized Dealer and/or Retailer.
• Always turn off the machine and disconnect the power supply whenever maintenance is performed.
• Never remove guards that require tools for removal.
• Never wash the machine with direct or pressurized jets of water or with corrosive substances.
• Have your equipment service center check the machine once a year.
• To prevent the formation of scale in the solution tank, do not store the machine with detergent solution in the tanks.
• Before using the machine make sure that all doors and covers are positioned as shown in this operating and maintenance
manual.
• When your machine is ready to be retired, it must be disposed of properly.
• Use only brushes furnished with the machine or those specified in the user's manual. Use of other brushes can compro-
mise safety.

GENERAL SAFETY REGULATIONS

5