Daily Maintenance - basic coatings Dirt Dragon Operator And Parts Manual

DAILY MAINTENANCE

3. CLEAN THE SqUEEGEE ASSEMBLIES
B
A. Remove recovery tank from machine.
B
B. Release tabs holding squeegee assemblies in place.
B
C. Disconnect vacuum hose from squeegee assembly.
B
D. Clean squeegee assembly with water.
E. Connect vacuum hose to squeegee assembly.
F. Insert tabs back into place.
G. Replace recovery tank.
4. CLEAN THE BRUSH ASSEMBLY
A. Remove finger nuts from right side of machine.
B. Remove right side retaining plate.
C. Pull brush out from the drive bearing.
D. Clean brush with water.
E. Insert brush into the drive bearing.
A
F. Replace right side retaining plate.
G. Tighten finger nuts on retaining plate.
11