Troubleshooting Guide - basic coatings Dirt Dragon Operator And Parts Manual

PROBLEM
The machine does not turn on
Insufficient water on brush
The machine does not clean well
The floor is not dry
Too much foam is generated
12

TROUBLESHOOTING GUIDE

CAUSE
Power cord is unplugged
The fuse is blown
Solution valve is closed
No water in solution tank
Pump switch is off
Blockage in solution tube
The pump is damaged
Brush drive switch is off
The brush is worn
Drive belt is loose
Vacuum switch is off
Dirty squeegee blades
Dirty squeegee body
Vac hose not attached to shoe
Squeegee blade is worn
No defoamer in recovery tank
REMEDY
Plug Cord into 120V outlet
Replace fuse
Open valve
Fill solution tank with water
Turn the solution switch on
Clean or replace the solution line
Repair or replace pump
Turn on brush drive
Replace brush
Adjust belt tension
Turn the vacuum switch on
Clean the squeegee blades
Clean the squeegee body
Attach vac hose to the squeegee shoe
Replace squeegee blade
Add defoamer to recovery tank