Operation
Busy Channel Lock-out (BCL)
This feature prevents accidental transmission on a busy channel.
This is recommended on channels where CTCSS is being used. If you
hear sound from the speaker (unless it's in Monitor Mode -- see below),
the BCL feature will prevent you from transmitting.
To activate BCL
Press and hold
To De-activate BCL
Press and hold
Monitor
This feature enables users to listen in for weak signals on the current
channel at the press of a button.
To use monitor
• For brief listening, press
• For continuous listening. Press and hold
beep will be heard and the receiver circuit will stay open letting in both
the noise & weak signals.
• Display shows MON and BUSY icons.
• To return to normal receive mode press
UNIDEN UH076SX-NB
bcl
for 1.5 secs. until BCL appears on display.
bcl
for 1.5 secs. until BCL disappears from the display.
mon
.
mon
mon
.
22
for 2 sec. A two tone
Handheld UHF-CB Transceiver